IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> BMW Wheel Hub diameter and sizes, Hub Centre Bore Sizes and ET/Offset, Jante BMW
Halogen
post Dec 24 2013, 05:47 PM
Post #1


100% BMW corupt
*****

Group: Members
Posts: 1,032
Joined: 5-June 11
From: Bucuresti
Member No.: 17,575
Car: BW E39 530D
Engine: M57



All ET/OFFSET is still dependent on tyre and wheel size so bear this in mind if you are trying to fit wheels from one model to a different model, also if the car is lowered then you may have issues with rubbing/non fitment due to fouling.

The higher the ET number the more the wheel will sit inside the wheel arch

1 Series E81/82/87/88 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 35-45
1 Series E82M = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 20-31

1 Series F20/F21 = PCD 5x120, centre bore 72.5mm and M14x1.25 bolt thread. ET 33-53

3 Series E21 = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. ET 12-20

3 Series E30 = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. ET 15-35
3 Series E30 M3 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 27-30

3 Series E36 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-47
3 Series E36 M3 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 35-47

3 Series E46 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-47
3 Series E46 M3 = PCD 5x120 centre bore 72.5mm and M12x1.5 bolt thread. Fronts ET 30-47, Rears ET 20-27,

3 Series E90/91/92/93 = PCD 5x120, Centre bore 72.5mm and M12x1.5 bolt thread. ET 30-45
3 Series E90/92/93 M3 = PCD 5x120, Centre bore 72.5mm and M12x1.5 bolt thread. ET 34-37

3 Series F30/F31 = PCD 5x120, Centre bore 72.5mm and M14x1.25 bolt thread. ET 31-47

5 Series E28 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 18-25

5 Series E34 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 13-20
5 Series E34ix (4x4) = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 46-55
5 Series E34 M5 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 20-22

5 Series E39 = PCD 5x120, centre bore 74.1mm and M12x1.5 bolt thread. ET 15-25
5 Series E39 M5 = PCD 5x120, centre bore 74.1mm and M12x1.5 bolt thread. ET 15-25

5 Series E60/61 = PCD 5x120 centre bore 72.5mm and M12x1.5 bolt thread. ET 15-32
5 Series E60/61 xDrive = PCD 5x120 centre bore 72.5mm and M12x1.5 bolt thread. ET 40-46
5 Series E60 M5 (Saloon) = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-32
5 Series E61 M5 (Touring) = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-32

5 Series F07 = PCD 5x120, centre bore 72.5mm and M14x1.25 bolt thread. ET 25-41
5 Series F10/F11 = PCD 5x120, centre bore 72.5mm and M14x1.25 bolt thread. ET 33-44

6 Series E24 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 19-22

6 Series E63/64 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 14-20
6 Series E63/64 M6 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-20

6 Series F12/13 = PCD 5x120, centre bore 72.5mm and M14x1.25 bolt thread. ET 30-44

7 Series E32 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 19-26

7 Series E38 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 13-25

7 Series E65/66/67/68 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 10-25

7 Series F01/02 = PCD 5x120, centre bore 72.5mm and M14x1.25 bolt thread. ET 25-41

8 Series E31 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 10-19

X1 E84 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-41

X3 E83 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 40-46

X3 F25 = PCD 5x120, centre bore 72.5mm and M14x1.25 bolt thread. ET 32-51

X5 E53 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 40-45

X5 E70 = PCD 5x120, centre bore 74.0mm and M14x1.25 bolt thread. ET 37-53
X5M E70 = PCD 5x120, centre bore FRONT 74.0mm, centre bore REAR 72.5mm and M14x1.25 bolt thread. ET 18-40

X6 E71 = PCD 5x120, centre bore FRONT 74.0mm, centre bore REAR 72.5mm and M14x1.25 bolt thread. ET 38-40

Z1 E30Z = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. ET 24-25

Z3 E36 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-41
Z3 M Coupe/M Roadster = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 20-41

Z4 E85/86 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 45-52

Z4 E89 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 29-40

Z8 E52 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 20-22

BMW Mini R50/R52/R53 = PCD 4x100, centre bore 56.2mm and M12x1.5 bolt thread. ET 37-48

BMW Mini R55/R56/R57/R58/R59/R60 = PCD 4x100, centre bore 56.2mm and M14x1.25 bolt thread. ET 37-48

This post has been edited by Halogen: Dec 24 2013, 05:49 PM
Go to the top of the page
 
+Quote Post
TiL
post Dec 25 2013, 10:13 PM
Post #2


100% BMW corupt
*****

Group: Administrators
Posts: 8,475
Joined: 17-October 05
From: Bucuresti
Member No.: 7
Car: E28 525i
Engine: M30 2.5 147cp



Posteaza si link-ul aici: http://bmwzone.ro/forums/index.php?showtop...20&start=20


--------------------
Inline 6 in a 5-er 4 ever
E28 528i, E39 525i touring, E39 520i touring, E53 X5 4.4i, E70 X5 3.0si, E46 318i

ex E39 520i exclusive, E39 525tds, E46 318d touring, E28 525i, E34 525i, E28 524td, E30 318i, E28 525i
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 





Google
 
RSS Lo-Fi Version Time is now: 28th March 2024 - 01:04 PM